Single warp metal meshes with quadrangular mesh
Woven metal meshes made of non-ferrous metal alloys, bronze, stainless steel.
Single metal meshes made of non-ferrous metal alloys TiPhBr/Brass80
|
Mesh number |
Nominal diameter of wire of warp and weft, mm |
Theoretical free opening size, mm |
||
|
warp |
weft |
warp |
weft |
|
|
16 |
0,27 |
0,30 |
0,36 |
0,53 |
|
24 |
0,25 |
0,27 |
0,17 |
0,40 |
|
26 |
0,23 |
0,25 |
0,16 |
0,36 |
|
32 |
0,165 |
0,18 |
0,15 |
0,24 |
|
40 |
0,13 |
0,15 |
0,12 |
0,24 |
Singe warp metal meshes made of Bronze of TiPhBr (for production of special paper)*
|
Mesh number |
Alloy and nominal diameter of warp and weft wire, mm |
Theoretical free opening size, mm |
||
|
warp |
weft |
warp |
weft |
|
|
7 |
0,45 TiPhBr6,5-0,4 |
0,50 TiPhBr6,5-0,4 |
0,98 |
0,92 |
|
9 |
0,35 TiPhBr6,5-0,4 |
0,40 TiPhBr6,5-0,4 |
0,76 |
0,60 |
|
9 |
0,50 TiPhBr6,5-0,4 |
0,50 TiPhBr6,5-0,4 |
0,61 |
0,61 |
|
12 |
0,31 TiPhBr8,0-0,3 |
0,31 TiPhBr6,5-0,4 |
0,52 |
0,52 |
|
14 |
0,26 TiPhBr8,0-0,3 |
0,26 TiPhBr6,5-0,4 |
0,45 |
0,45 |
|
16 |
0,25 TiPhBr8,0-0,3 |
0,28 TiPhBr6,5-0,4 |
0,38 |
0,39 |
|
28 |
0,21 TiPhBr8,0-0,3 |
0,23 TiPhBr6,5-0,4 |
0,15 |
0,30 |
|
28 |
0,22 TiPhBr8,0-0,3 |
0,24 � 80 |
0,14 |
0,37 |
|
32 |
0,165 TiPhBr8,0-0,3 |
0,18 TiPhBr6,5-0,4 |
0,15 |
0,24 |
Single metal meshes made of stainless steel
|
Mesh number |
Nominal diameter of warp and weft wire, mm |
Theoretical free opening size, mm |
||
|
warp |
weft |
warp |
weft |
|
|
10 |
0,40 |
0,40 |
0,60 |
0,78 |
|
14 |
0,35 |
0,35 |
0,36 |
0,70 |
|
16 |
0,25 |
0,28 |
0,37 |
0,55 |
|
18 |
0,25 |
0,25 |
0,31 |
0,52 |
|
0,25 |
0,28 |
0,31 |
0,49 |
|
|
0,24 |
0,24 |
0,32 |
0,37 |
|
|
24 |
0,20 |
0,24 |
0,22 |
0,40 |
|
22 |
0,20 |
0,22 |
0,26 |
0,34 |
|
28 |
0,18 |
0,18 |
0,18 |
0,27 |
ATTENTION!
If you can not find the required mesh in our catalogue, we can always produce it according to your special requirements. The minimum purchase is 150-200 sq.m.
Engineering capabilities of our plant make possible the production of meshes with the following parameters:
- woven metal meshes made of wire of non0ferrous metal alloys (tin-phosphor bronze and brass), stainless steel, fechral, low carbon steel with diameters range 0,10 mm to 1,0 mm and maximum mesh width of 7,5 m and free opening size 0,16 mm to 9,0 mm. There is an extended range of all kind of stainless steel meshes, its numbers and size. These are plain or twill weaved meshes, twisted, triple, unlerlaying, filter and special purpose ones.
For production of all metal meshes with restricted opening size in JSC Krasnokamsk Metal Mesh Works there are modern high-effective weaving machines manufactured by international companies, drawing machinery guarantying a high quality of wire. This wire is produced of import stock materials.
To order and purchase a woven metal mesh, please call to our sales department on the phones stated in Contacts.