Woven synthetic fabrics
- Woven synthetic fabrics Single layer fabrics
- Woven synthetic fabrics Multilayer fabrics
Physical and mechanical properties of woven synthetic fabrics
|
Tensile strength, kgs/cm |
|
|
Single layer ones �� 6-14 |
25-130 |
|
Single layer ones �� 16-40 |
30-70 |
|
Multilayer ones �� 22-64 |
45-170 |
|
Relative elongation along |
0,5-1,7 |
|
Temperature of material softering |
from + 230 to (+249) |
|
Operational fabric temperature,��C |
|
|
Fabric made of polyester monofilament |
from -40 to +60 |
|
Fabric made of polypropylene monofilament |
from -15 to +60 |
|
Fabric made of hydrolysis resistant polyester monofil |
from -40 to +100 |
Synthetic fabrics made of polyester monofilament are
- resistant to mineral and organic acids effect, alkaline (with concentration higher than 10%, pBT 9–11) and organic solvents (acetone, benzene, carbon tetrachloride);
- highly resistant to atmospheric forcing, not water-soluble, biochemically resistant, good electric insulating material;
- soluble in phenols, concentrated sulphuric and azotic acids;
- not to be used under long-term effect of high temperature steam (more than 110�C) as it cause the hydrolytic break-down of fibers and decrease of strength.
- Synthetic polyester fabrics including polyamide yarns must not be cleaned with mineral and organic acids as well as with chemicals consisting of oxidizers (e.g. peroxide), because it can result in destruction of polyamide yarns.
Woven synthetic fabrics made of polyester monofilament are confirmed by hygiene certificate.
Polypropylene fabrics are resistant to mineral and organic acids, alkalis (with concentration less by 40%, pBT 12 at the temperature up to 110�C) and less resistant to sunshine and UV light.
Please call to the sales department on the phones stated in Contacts to order and to purchase a woven fabrics directly from the producer.